Bluetooth connectivity is becoming more and more common. This is due to how popular it has become, not only in newer tech like cellphones but also in devices that are old, Like PC keyboards. There are however some people who still use old technology, such as the classic keyboard with the big USB plug sticking out of it. Have no fear though! How To Convert USB Keyboard To Bluetooth has never been easier!

Fancy using your wireless keyboard for all day trading on the go with your tablet or smartphone? Bluetooth keyboards are a great way to make typing easier and more convenient. This article will show you how to convert your USB Keyboard to Bluetooth, so you don’t have to worry about packing up wires. Here’s what you’ll need:

Your USB keyboard can be converted to a Bluetooth Keyboard. You can make it wireless and not have to worry about cords or plugs. Lets get started!

  1. Take the battery cover off of the back of your keyboard.
  2. Press down on tab A and pull up on tab B, which is located behind the battery compartment door.
  3. Remove all batteries from the inside of your keyboard.
  4. Replace them with new ones that meet specifications for AA size batteries (not included).
  5. Put the empty compartment door back onto its hinges and snap it shut by pressing in on both sides until they click into place.
  6. Turn over your keyboard so that you’re looking at its bottom surface
  7. Now that you’re looking at its bottom surface, find where the battery cover was previously. There, you will see a small compartment containing a switch with an up/down arrow printed next to it. This is almost always set to “U” which means that Bluetooth is currently off. To enable our keyboard’s Bluetooth connectivity, simply move the switch from “U” (the default setting) down towards the edge of the keyboard until you hear a click.
  8. On your computer, open up your Bluetooth settings by clicking on Start -> Control Panel -> Bluetooth Devices.
  9. Make sure you’re logged into the account that your keyboard is associated with, then click “Add” under the heading of “Devices”.
  10. Once your computer finds your Bluetooth-enabled keyboard, it will prompt you to enter in a passcode before connecting. The default passcode

What are the advantages of a wireless keyboard?

  • Easily transportable
  • No wires to worry about being tangled or pinched
  • Great for using laptops on the go instead of their built-in keyboards!

How To Make a Wired Keyboard Bluetooth?

Most computer peripherals are designed to be used with USB ports. One example of this is the wired keyboard which uses a standard USB cable. While these devices are convenient, there are many reasons why you might want to how to make a wired gaming keyboard wireless.

  • This may sound like a very complex process, but in reality, it’s not much more difficult than taking something apart and putting it back together again! There are several steps involved in making your device Bluetooth ready –
  • the first step is converting the USB port itself to work wirelessly.
  • This is done by purchasing a micro-controller that can be plugged into the USB port and will act as the middle man between the keyboard and computer.
  • The receiver for this controller would then plug into an available USB port on your computer or laptop.
  • Once you have your device Bluetooth ready, you’ll need to purchase additional components in order to convert your wired keyboard to Bluetooth.
  • Turn on both microcontrollers and both radio transmitters.
  • Connect power to the computer and restart the PC.

How To Make Keyboard And Mouse Wireless

We live in an increasingly wireless world, so why not make your mouse and keyboard wirelessly for conference? Here are the steps you can take to get started.

  1. First, plug your dongle into the USB port of your laptop or PC.
  2. Next, open up Windows by clicking on the logo at the bottom left-hand corner of the screen.
  3. Then click on ‘Settings’. Select ‘Devices’ from there and turn Bluetooth on.
  4. Press and hold down that same button when it’s time to sync with any devices that need pairing (in this case, just press it once).
  5. Choose the mouse in this list to connect it to your computer

When prompted for a device name during setup, give them whatever catchy title is easiest for you to remember! Now skip through all those tedious installation screens.

How To Make a Wired Keyboard Wireless

Here we have a complete guide that how to make a wired keyboard wireless. Let’s get started!

  1. Look for an opportunity to “borrow” the USB receiver from the mouse that came with your computer. If you don’t have one, buy a USB extension cord and rip out its innards (or go on eBay and buy a cheap used computer).
  2. Open up the back of the case, locate the two metal contacts where power comes in from your computer’s USB port, and short them together by hooking one wire from your new adapter onto each of these contacts by wrapping it around or cutting off pieces of it and soldering them on.
  3. Wrap some electrical tape around it if you’re worried about super-shorts causing your system board to explode (this has never happened to anyone ever). Labeling the adapter is optional.
  4. Plug your wired keyboard into USB port #1 on the adapter, and plug the USB receiver for your wireless mouse or trackball into USB port #2 on the adapter. And voila! You have made a mostly functional, cheap wireless mouse/keyboard extender with just some wire, copper solder, electrical tape, scissors, pliers, wire strippers and an actual working computer with at least one free USB slot.
  5. If you are using this for a PS/2 keyboard or mouse instead of using the above method then please note that it is best to use them in tandem with each other because they do not share common ground and this will result in only one of them working at a time.
  6. To use your setup as a USB keyboard you need to use the following settings: Keyboard type: Standard 101/102-key or Microsoft Natural PS/2 Keyboard (if using a PS/2 mouse)
  7. Enhanced 101/102-key Keyboard (if using a USB mouse)
  8. Mouse Control: disabled
  9. Enter the control panel and go into the “keyboard” section and change it from “Standard 104/105-key or Microsoft Natural PS/2 keyboard” to “USB Input Device”  and click OK.8. If all has gone well, your PC should now recognize both input devices as USB instead of just one or the other.
  10. You can now either go into the “mouse” section and disable the PS/2 port (recommended) or you can use a program like PS2 Emu to make your PS/2 mouse appear as another USB device which also requires installing drivers for it, but this is not recommended.
  11. Now you should be able to play any game and move and shoot with both your keyboard and mouse! This will work on Windows XP, Vista, 7, 8 or 10. If you are using Windows 95 through XP then read below:
  12. A cool trick with these cheap adapters is being able to plug one side of them into an extension cord so that you have one free USB slot on the front or back of your computer case. Just don’t plug both into the same extension cord or you will have a rat’s nest of wires that won’t fit inside your case and a wireless mouse/keyboard combo with a forty-foot USB cord.
  13. If you still can’t get it to work, try reinstalling any device drivers for the devices in question and reboot several times until they start working. For all other versions of Windows:

How To Make a Bluetooth Wireless Keyboard Wired

No, you’re not experiencing a case of deja vu. For what seems like the millionth time this year, we’ve got another Bluetooth wireless keyboard that will make typing an effortless breeze from across the room! And you want to make it How To Convert USB Keyboard To Bluetooth. You can also use it as a wired USB keyboard which means you don’t have to plug in batteries or charge the board. Let’s have a look at how can I make a wireless keyboard wired.

The steps are simple:

  1. Cut out holes on one side of an ordinary USB cable and glue them onto the backside of the Bluetooth board.
  2. When finished, just pop it into your computer’s USB port and you’re ready to rock!

How to Make a Wireless Keyboard Wired

  • A USB cable or computer with at least one free USB port
  • Plug in your USB cable into your mouse receiver and your computer. If the device is already plugged in, unplug it first then proceed with step 2.
  • Unscrew the bottom of your mouse to separate the two halves apart Remove batteries if there is any inside there
  • Locate where you should screw back together again using the picture below as a reference Screw back together
  • Insert USB plug firmly until it snaps into place
  • When connected correctly, the LED light on the receiver should turn green. If it’s not, try turning your mouse or unplugging and replugging USB cable into the computer again to see if it works

How to make Apple wired keyboard wireless

Apple keyboards are not designed to be wireless. A wireless Bluetooth keyboard, however, is more appropriate for your needs.

How Do You Make a Wired Mac Keyboard Wireless

If you want to make your wired mac keyboard wireless. Then just follow these points.

  1. Remove the cable from the keyboard by taking out a single screw on the back.
  2. Underneath, you will find a battery pack that is plugged into both ends of the cable. Remove this from underneath and replace one end with a cord that plugs into your computer’s USB port.
  3. Now, figure out where to attach an amplifier so you can plug in a battery pack or portable speakers for power outside of your computer, and fix it to where you want it using screws if necessary. Keep in mind accessibility issues.

Conclusion

We hope this guide of How To Convert USB Keyboard To Bluetooth has been helpful in explaining how to convert your USB keyboard to Bluetooth. Now that you know what it takes, go ahead and get started with the process!

It’s quick and easy for most people, so just follow these steps again if you need a refresher on any of them. You’ll be able to enjoy the convenience of wireless keyboards without having cables all over your desk or worrying about tripping on one while walking around your room.